[1] S. Eiamsa-ard, K. Wongcharee, S. Sripattanapipat, 3-D Numerical simulation of swirling flow and convective heat transfer in a circular tube induced by means of loose-fit twisted tapes, Int. Commun. Heat Mass Transf 36 (2009) 947–955.
[2] R. L. Webb, Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design, Int. J. Heat Mass Transf 24 (1981) 715-726.
[3] K. Wongcharee, S. Eiamsa-ard, Friction and heat transfer characteristics of laminar swirl flow through the round tubes inserted with alternate clockwise and counter-clockwise twisted-tapes, Int. Commun. Heat Mass Transf 38 (2011) 348–352.
[4] L. Wang, B. Sunden, Performance comparison of some tube inserts, Int. Commun. Heat Mass Transf 29 (2002) 45-56.
[5] M. M. K. Bhuiya, M. S. U. Chowdhury, M. Saha, M. T. Islam, Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts, Int. Commun. Heat Mass Transfer 46 (2013) 49-57.
[6] R. M. Manglik, A. E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes. Part II: Transition and turbulent flows, Trans. ASME J. Heat Transf 115 (1993) 890-896.
[7] S. K. Saha, A. Dutta, S. K. Dhal, Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements. Int. J. Heat Mass Transfer 44 (22) (2001) 4211-4223.
[8] S. Ray, A. W. Date, Friction and heat transfer characteristics of flow through square duct with twisted tape insert. Int. J. Heat Mass Transfer 46 (5) (2003) 889-902.
[9] M. A. Akhavan-Behabadi, Ravi Kumar, A. Mohammadpour, M. Jamali-Asthiani, Effect of twisted tape insert on heat transfer and pressure drop in horizontal evaporators for the flow of R-134a. Int. J. Refrig 32 (5) (2009) 922-930.
[10] S. Eiamsa-ard, C. Thianpong, P. Promvonge, Experimental investigation of heat transfer and flow friction in a circular tube fitted with regularly spaced twisted tape elements. Int. Commun. Heat Mass Transfer 33 (10) (2006) 1225-1233.
[11] P. Promvonge, S.Eiamsa-ard, Heat transfer behaviors in a tube with combined conical-ring and twisted-tape insert. Int. Commun. Heat Mass Transfer 34 (7) (2007) 849-859.
[12] S. Eiamsa-ard, C. Thianpong, P. Eiamsa-ard, P. Promvonge, Convective heat transfer in a circular tube with short-length twisted tape insert. Int. Commun. Heat Mass Transfer 36 (3) (2009) 365-371.
[13] S. Eiamsa-ard, C. Thianpong, P. Eiamsa-ard, P. Promvonge, Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem. Int. Commun. Heat Mass Transfer 37 (1) (2010) 39-46.
[14] S. Eiamsa-ard, C. Thianpong, P. Eiamsa-ard, Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes. Exp. Therm. Fluid Sci 34 (1) (2010) 53-62.
[15] S. Eiamsa-ard, K. Wongcharee, P. Eiamsa-ard, C. Thianpong, Heat transfer enhancement in a tube using delta-winglet twisted tape inserts. Appl. Therm. Eng 30 (4) (2010) 310-318.
[16] S. Eiamsa-ard, P. Promvonge, Heat transfer characteristics in a tube fitted with helical screw-tape with/without core-rod inserts. Int. Commun. Heat Mass Transfer 34 (2) (2007) 176-185.
[17] S.W. Chang, K.W. Yu, M.H. Lu, Heat transfer in tubes fitted with single, twin and triple twisted tapes, Exp. Heat Transf 18 (2005) 279-294.
[18] S. Eiamsa-ard, K. Kiatkittipong, Heat transfer enhancement by multiple twisted tape inserts and TiO2/water nanofluid, Appl. Therm. Eng 70 (2014) 896-924.
[19] P. Rathnakumar, K. Mayilsamy, S. Suresh, P. Murugesan, Laminar heat transfer and pressure drop in tube fitted with helical louvered rod inserts using CNT/water nanofluids, J. Bionanoscience 8 (3) (2014) 160-170.
[20] P. Rathnakumar, K. Mayilsamy, S. Suresh, P. Murugesan, Laminar heat transfer and friction factor characteristics of carbon nano tube/water nanofluids, J. Nanoscience Nanotechnology 14 (3) (2014) 2400-2407.
[21] Zamzamian, S.N. Oskouie, A. Doosthoseini, A. Joneidi, M. Pazouki, Experimental investigation of forced convective heat transfer coefficient in nanofluids of Al2O3/EG and CuO/EG in a double pipe and plate heat exchangers under turbulent flow, Exp. Therm. Fluid Sci 35 (2011) 495-502.
[22] P. Razi, M.A. Akhavan-Behabadi, M. Saeedinia, Pressure drop and thermal characteristics of CuO-base oil nanofluid laminar flow in flattened tubes under constant heat flux, Int. Commun. Heat Mass Transf 38 (2011) 964-971.
[23] H. Safikhani, A. Abbassi, Effects of tube flattening on the fluid dynamic and heat transfer performance of nanofluid flow, Adv. Powder Technolog 25 (3) (2014) 1132-1141.
[24] K.V. Sharma, L. Syam Sundar, P.K. Sarma, Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert, Int. Commun. Heat Mass Transf 36 (2009) 503-507.
[25] L. Syam Sundar, K.V. Sharma, Turbulent heat transfer and friction factor of Al2O3 nanofluid in circular tube with twisted tape inserts, Int. Commun. Heat Mass Transf 53 (2010) 1409-1416.
[26] L. Syam Sundar, N.T. Ravi Kumar, M.T. Naik, K.V. Sharma, Effect of full length twisted tape inserts on heat transfer and friction factor enhancement with Fe3O4 magnetic nanofluid inside a plain tube: an experimental study, Int. J. Heat Mass Transf 55 (2012) 2761-2768.
[27] A.A. Abbasian Arani, J. Amani, Experimental study on the effect of TiO2-water nanofluid on heat transfer and pressure drop, Exp. Therm. Fluid Sci 42 (2012) 107-115.
[28] K. Wongcharee, S. Eiamsa-ard, Enhancement of heat transfer using CuO/water nanofluid and twisted tape with alternate axis, Int. Commun. Heat Mass Transf 38 (2011) 742-748.
[29] M.T. Naik, G. Ranga Janardana, L. Syam Sundar, Experimental investigation of heat transfer and friction factor with water-propylene glycol based CuO nanofluid in a tube with twisted tape inserts, Int. Commun. Heat Mass Transf 46 (2013) 13-21.
[30] K. Deb, S. Agrawal, A. Pratap and T. Meyarivan, T., A fast and elitist multi-objective genetic algorithm: NSGA-II. IEEE Trans Evolutionary Computation 6 (2002) 182-97.
[31] H. Safikhani, M. A. Akhavan-Behabadi, N. Nariman-Zadeh and M. J. Mahmoodabadi, Modeling and multi-objective optimization of square cyclones using CFD and neural networks, Chem. Eng. Res. Des 89 (2011) 301–309.
[32] H. Safikhani, A. Hajiloo, M. A. Ranjbar, Modeling and multi-objective optimization of cyclone separators using CFD and genetic algorithms, Comput. Chem. Eng 35 (6) (2011) 1064–1071.
[33] H. Safikhani, A. Abbassi, A. Khalkhali, M. Kalteh, Multi-objective optimization of nanofluid flow in flat tubes using CFD, artificial neural networks and genetic algorithms, Adv. Powder Technol 25 (5) (2014) 1608–1617.
[34] N. Amanifard, N. Nariman-Zadeh, M. Borji, A. Khalkhali and A. Habibdoust, Modeling and Pareto optimization of heat transfer and flow coefficients in micro channels using GMDH type neural networks and genetic algorithms, Energy Convers. Manage 49 (2008) 311-325.
[35] S. W. Churchil, Viscous Flows: The Practical Uses of Theory, Butterworth, Boston (1988) 9- 40.
[36] Bejan, Convection heat transfer, Wiley (2004) 107.