Mixed Convection of Variable Properties Al2O3-EG-Water Nanofluid in a Two-Dimensional Lid-Driven Enclosure

Document Type : Original Research Paper


Department of Thermofluids, Faculty of Mechanical Engineering and Energy Research Institute, University of Kashan, Kashan, Iran


In this paper, mixed convection of Al2O3-EG-Water nanofluid in a square lid-driven enclosure is investigated numerically. The focus of this study is on the effects of variable thermophysical properties of the nanofluid on the heat transfer characteristics. The top moving and the bottom stationary horizontal walls are insulated, while the vertical walls are kept at different constant temperatures. The study is carried out for Richardson numbers of 0.01–1000, the solid volume fractions of 0–0.05 and the Grashof number of 104. The transport equations are solved numerically with a finite volume approach using the SIMPLER algorithm. The results show that the Nusselt number is mainly affected by the viscosity, density and conductivity variations. For low Richardson numbers, although viscosity increases by increasing the nanoparticles volume fraction, due to high intensity convection of enhanced conductivity nanofluid, the average Nusselt number increases for both constant and variable cases. However, for high Richardson numbers, as the volume fraction of nanoparticles increases heat transfer enhancement occurs for the constant properties cases but deterioration in heat transfer occurs for the variable properties cases. The distinction is due to underestimation of viscosity of the nanofluid by the constant viscosity model in the constant properties cases and states important effects of temperature dependency of thermophysical properties, in particular the viscosity distribution in the domain.


[1] M.A.R. Sharif, Laminar mixed convection in shallowinclined driven cavities with hot moving lid on top andcooled from bottom, Journal of Applied ThermalEngineering 27 (2007) 1036-1042.
[2] K.M. Khanafer, A.M. Al-Amiri, I. Pop, Numericalsimulation of unsteady mixed convection in a drivencavity, using an externally excited sliding lid, EuropeanJournal of Mechanics- B/Fluids 26 (2007) 669-687.
[3] S. M. Aminossadati, B. Ghasemi, A numerical study ofmixed convection in a horizontal channel with a discreetheat source in an open cavity, European Journal ofMechanics- B/Fluids 28 (2009) 590-598.
[4] K.Venkatasubbaiah, The effect of buoyancy on thestability mixed convection flow over a horizontal plate,European Journal of Mechanics - B/Fluids 30 (2011)526-533.
[5] X.Q. Wang, A.S. Mujumdar, Heat transfercharacteristics of nanofluids: a review, InternationalJournal of Thermal Science 46 (2007) 1-19.
[6] J. Choi, Y. Zhang, Numerical simulation of laminarforced convection heat transfer of Al2O3-waternanofluid in a pipe with return bend, InternationalJournal of Thermal Science 55 (2012) 90-102.
[7] W. Daungthongsuk, S.Wongwises,A critical review ofconvective heat transfer of nanofluids, Renewable &Sustainable Energy Reviews 11 (2007) 797-817.
[8] P.K. Namburu, D.K. Das, K.M. Tanguturi, R.S. Vajjha,Numerical study of turbulent flow and heat transfercharacteristics of nanofluids considering variableproperties, International Journal of Thermal Science 48(2009) 290-302.
[9] R.K. Tiwari, M.K. Das, Heat transfer augmentation in atwo-sided lid-driven differentially heated square cavityutilizing nanofluids, International Journal of Heat andMass Transfer 50 (2007) 2002–2018.
[11] M. Muthtamilselvan, P. Kandaswamy, J. Lee, Heattransfer enhancement of copper_water nanofluids in alid-driven enclosure, Communications in NonlinearScience and Numerical Simulation 15 (6) (2009) 1501-1510.
[12] M. Shahi, A.H. Mahmoudi, F. Talebi, Numerical studyof mixed convective cooling in a square cavityventilated and partially heated from the below utilizingnanofluid, International Communications in Heat andMass Transfer 37 (2010) 201–213.
[13] E. Abu-nada, A. J. Chamkha, Mixed convection flowin a lid-driven inclined enclosure filled with a nanofluid,European Journal of Mechanics - B/Fluids 29 (2010)472-482.
[14] M. M. Billah, M. M. Rahman, M. Shahabuddin, A. K.Azad, Heat transfer enhancement of Copper-waternanofluids in an inclined lid-driven triangular enclosure,Journal of Scientific Research 3 (2) (2011) 525-538.
[15] A. J. Chamkha, E. Abu-nada, Mixed convection flowin single- and double-lid driven square cavities filledwith water-Al2O3 nanofluid: Effect of viscosity models,European Journal of Mechanics - B/Fluids 36 (2012) 82-96.
[16] H. Khorasanizadeh, M. Nikfar, J. Amani, Entropygeneration of Cu-water nanofluid mixed convection in acavity, European Journal of Mechanics - B/Fluids 37(2013) 143-152.
[17] G. A. Sheikhzadeh, H. Teimouri, M. Mahmoodi,Numerical study of mixed convection of nanofluid in aconcentric annulus with rotating inner cylinder,Transport Phenomena in Nano and Micro Scales 1(2013) 26-36.
[19] X. Wang, X. Xu, S.U.S. Choi, Thermal conductivity ofnanoparticle–fluid mixture, Journal of Thermophysicsand Heat Transfer 13 (1999) 474–480.
[20] P.K. Namburu, D.P. Kulkarni, D. Misra, D.K. Das,Viscosity of copper oxide nanoparticles dispersed inethylene glycol and water mixture, ExperimentalThermal and Fluid Science 32 (2007) 397-402.
[21] P.K. Namburu, D.P. Kulkarni, A. Dandekar, D.K. Das,Experimental investigation of viscosity and specific heatof silicon dioxide nanofluids, Micro Nano Letters 2(2007) 67-71.
[22] B.C. Sahoo, R.S. Vajjha, R. Ganguli, G.A. Chukwu,D.K. Das, Determination of rheological behavior ofaluminum oxide nanofluid and development of newviscosity correlations, Petroleum Science andTechnology 27 (2009) 1757-1770.
[23] R.S. Vajjha, D.K. Das, Experimental determination ofthermal conductivity of three nanofluids anddevelopment of new correlations, International Journalof Heat and Mass Transfer 52 (2009) 4675-4682.
[24] R.S. Vajjha, D.K. Das, Specific heat measurement ofthree nanofluids and development of new correlations,International Journal of Heat and Mass Transfer 131(2009) 1-7.
[25] R.S. Vajjha, D.K. Das, B.M. Mahagaonkar, Densitymeasurement of different nanofluids and theircomparison with theory, Petroleum Science andTechnology 27 (2009) 612-624.
[26] E. Abu-Nada, A.J. Chamkha, Effect of nanofluidvariable properties on natural convection in enclosuresfilled with a CuO-EG-Water nanofluid, InternationalJournal of Thermal Science 49 (2010) 2339-2352.
[27] E. Abu-Nada, Z. Masoud, H.F. Oztop, A. Campo,Effect of nanofluid variable properties on naturalconvection in enclosures, International Journal ofThermal Science 49 (2010) 479-491.
[28] G.A. Sheikhzadeh, M. Ebrahim Qomi, N. Hajialigol,A. Fattahi, Numerical study of mixed convection flowsin a lid-driven enclosure filled with nanofluid usingvariable properties, Results in Physics 2 (2012) 5-13.
[29] S. Mazrouei Sebdani, M. Mahmoodi, S. M. Hashemi,Effect of nanofluid variable properties on mixedconvection in a square cavity, International Journal ofThermal Science 52 (2012) 112-126.
[30] C.H. Chon, K.D. Kihm, S.P. Lee, S.U.S. ChoiEmpirical correlation finding the role of temperatureand particle size for nanofluid (Al2O3) thermalconductivity enhancement, Applied Physics Letters 87(2005) 153107.
[31] B.C. Pak, Y.I. Cho, Hydrodynamic and heat transferstudy of dispersed fluids with submicron metallic oxideparticles, Experimental Heat Transfer 11 (1999) 151-170.
[32] ASHRAE Handbook, Fundamentals. American Societyof Heating, Refrigerating and Air-ConditioningEngineers Inc., Atlanta, GA, 2005.
[33] F.P. Incropera, D.P. DeWitt, Introduction to HeatTransfer, third ed. John Wiley & Sons, Inc., New York,1996.
[34] R.S. Vajjha, D.K. Das, D.P. Kulkarni, Development ofnew correlations for convective heat transfer andfriction factor in turbulent regime for nanofluids,International Journal of Heat and Mass Transfer 53(2010) 4607-4618.
[35] S.V. Patankar, Numerical Heat Transfer and FluidFlow, McGraw-Hill, 1980.
[36] B. Ghasemi, S. M. Aminossadati, Natural convection heattransfer in an inclined enclosure filled with a Water-Cuo Nanofluid,Numerical Heat Transfer 55 (2009) 807-823.